JP Magazine Homepage JP Magazine

P84650 Image Large

Prev Next
Remove the snap-rings from the mainshaft so you can remove the drive sprocket, syncro hub, and stop-ring. If needed, pound the two caged needle bearings supplied with the kit into the drive sprocket. The trick here is to use a big socket to drive them in.
Nice Tailshaft

 Remove the snap-rings from the mainshaft so you can remove the drive sprocket, syncro hub, and stop-ring. If needed, pound the two caged needle bearings supplied with the kit into the drive sprocket. The trick here is to use a big socket to drive them in.  View Related Article

 

Get Adobe Flash player