1997 Jeep Wrangler TJ 4x4 Lift Kit Install - Project Steal J Part 5
|
The Fabtech coil spacers slide over the factory bumpstop mounts and reuse the factory bumpstop cups. The rear attaches to the frame via the extended bolts, while the front is held in place with six small-set screws. TAG's Jay Miller advises against the use of poly spring spacers in the rear taller than 3/4-inch because the larger diameter rear spring can punch through the spacer, a problem we shouldn't have with the steel Fabtech kit. View Related Article
|
|