Rock Bashing Mounts
Anyone who wheels their coil sprung Jeep knows how thin the lower control arm mounts are, and how easily they can not only suffer damage, but can rip off the axle. These mounts from Rock Krawler Suspension are made from 1/4-inch laser-cut steel, are boxed in, and include a front skid design. Adjustable lower control arms are required for used with these weld-on mounts. Information: Rock Krawler Suspension, 518/270-9822, rockkrawler.com
Interior Upgrade
Leatherseats.com's leather seat cover kits bring new life to your old torn up Jeep interior. These kits replace the existing upholstery in your vehicle to give you that custom one-off interior you have always wanted. These kits are designed for the factory seat covers to ensure ease of installation and a great fit. Available for most vehicles in over 60 different colors even some exotic materials such as ostrich and alligator. Pictured is black leather with Ice Gray centers. Information: Leatherseats.com, 866/639-7328, leatherseats.com
Beefcake Arms
These Billet Steel Dana 60 arms from K.O.R.E Off Road are beefy and are perfect for your kingpin front Dana 60. They are CNC machined from cold rolled steel for ultimate strength and a precise fit, come with a fifth drilled for use with Reid racing knuckles, feature a 10-degree taper machined for correct steering linkage alignment, and come blank but can be drilled by the customer or K.O.R.E. at the time of ordering. Information: King's Off Road Enterprises LLC, 918/248-1034, kore4x4customs.com
Diesel Breathing
If you are one of the lucky readers to have bought a 3.0L CRD Grand Cherokee, MBRP now has a filter-back performance exhaust system that has smooth mandrel bends and reduced bend-degree angles to provide maximum airflow for the best in performance, sound, and fuel efficiency. Available in both stainless steel and aluminized steel, each system selection comes complete with a mirror polished T304 stainless tip to perfectly complete the system of your choice. Information: MBRP Inc. Performance Exhaust, 888/636-7223, mbrp.com
Mud Winch Extraordinaire
First off, it isn't Warn saying it is a mud winch. We are saying it. We know that the most common cause of the winch itself dying when under hard loads (like in mud or up long snowy hills) is because of the motor overheating. Warn recently introduced the Endurance 12.0, which is a winch with its own cooling air supply that should greatly increase the life and the duty cycle of the winch. It's a 12,000-pound winch with a 39.5 ft/min no-load line speed. Information: Warn Industries, Inc, 800/543-9276, warn.com
Edlebrock AMC Water Pump
The Edlebrock Victor Series water pump features an O-ring backing plate seal for superior sealing interface, increased flow and cooling performance, Heavy-duty 3/4-inch integral ball bearings and severe duty seal, durable 356-T6 cast-aluminum body, a billet hub with dual bolt pattern for various pulley applications, and a six-vane impeller all make for a high-end water pump for your AMC V-8. Information: Edlebrock, 310/781-2222, edelbrock.com
Have It Your Way
Borla Performance Industries has a plethora of Cat-Back kits for the JK Wrangler. Whether you have a two-door or a four-door, and whether you've got the hankering for single outlet or dual outlet kit, Borla has a 2 1/2-inch stainless steel Cat-Back system that is lighter, offers better fuel economy, better power, that authentic Borla tone, and a million-mile warranty. Information: Borla Performance Industries, 877-GO-BORLA, borla.com
Bolt-In Randomness
Random Technology Super Stainless catalytic converters are the only catalytic converters to feature all-stainless steel construction, high-efficiency substrates and maximum air flow capacity. They allow an engine to deliver maximum horsepower and efficiency, while meeting all emissions requirements. Direct-fit (bolt-in) models are available for most CJs, Wranglers and Cherokees with four-cylinder, six-cylinder or V-8 engines. Information: Random Technology, 770/554-4242, randomtechnology.com
Roll Cage Hi-Lift
This system from River Raider utilizes the backside of the factory rollcage seatbelt mount for a secure mounting location for your 48-inch High Lift Jack. The brackets come standard with a durable, textured black finish. This easy-to-install kit does not impede the removal of a hard top or the lowering/raising of your soft top on your TJ or your two or four door JK. The kit includes all heavy-duty 1/2-inch stainless steel hardware; 1/2-inch thread tap, and installation instructions. Information: River Raider Off-Road, 717/262-3079, riverraider.com