Easy NP231 Upgrade
|
Apply a thin coat of grease to the front and rear CV yokes and gun down the nuts to about 110 lb-ft. Don't forget to use red Loctite on the yoke nut and install the supplied rubber yoke seals to prevent leaks. If your T-case doesn't have a vacuum or 4WD indicator switch in the rear bearing retainer at the shift rail, install the supplied 5/8-inch Allen head bolt. For vehicles with electronic speedometers, you will also want to make sure the speedo sensor is installed in the same orientation as it was removed; otherwise the "Check Engine" light will come on and the Speedo won't work. View Related Article
|
|
|
|