Advance Adapters 4-Speed Atlas Transfercase - Crawl Time
|
The new rear driveshaft for the 4 Speed Atlas features a 1350 CV with 13 degrees more angularity than the 1310 CV it replaces. Since the driveshaft flange required for the 1350 CV eats up some length, the new rear shaft actually shares the same U-joint-to-U-joint measurement as the old driveshaft. However, had Miller chose to retain a 1310 CV driveshaft in the rear with a CV yoke the U-joint-to-U-joint measurement would have increased from 17 1/4 inches to 18 3/8 inches. View Related Article
|
|