Jeep CJ Sound System - Basic Tunes
|
The new Sony head unit uses what's called a DIN (large rectangle) mount, but the factory CJ dash has a two-knob (two holes and a small rectangle) setup. We marked the area for trimming and taped the edges so we wouldn't scratch outside the lines. It's important to view and measure behind the dash for space and to avoid damage to wires and brackets. We used a small cut-off saw to remove the excess material. The head unit comes with a metal cage for proper mounting. This may look difficult, but the directions are very easy to follow and give great explanations of each wire and the purpose. It's much like hooking up a home stereo system with 12 volts instead of 110. We used the factory radio wiring for most connections and ran necessary cables to the back of the cab for the other equipment. View Related Article
|
|