Jeep Cherokee XJ Dome Light Upgrade - Let There Be Light
|
If you want the light to function like ours, you will need to cut all the wires off the switch when you get it from Camping World and rewire it. This is a pin out of the back of the switch, which is included with the light. L1 is one light in the new assembly, while L2 is the other light. Note that two poles of the switch aren't used; that is the off position. You will find three wires from the Jeep to your OE light, a positive wire (which you wire directly to L1 and L2), a switched ground wire (switched with the tailgate), and a wire from the Jeep which is also a switched ground (switched with the doors or interior light switch). View Related Article
|
|
|
|