July 2009 Randy's Electrical Corner LED Headlights
|
Imagine my surprise when I opened the box and saw a big honkin' heatsink on the back of what looked to be a headlight. Jeez...can you imagine how much power these put out to require a heatsink like this? Is should have braced myself to pick it up out of the box because these suckers are solid: ten fully potted LEDs and a complicated reflector to get the light down the road all make for a good unit. Once I'd gotten the light out of the box and had some time to mess with it, i was pleasantly surprised to find not just two, but three wires going into the housing. That meant not only do these things have a low beam, but a high beam as well. And, there are tabs cast into the back of it to keep it aligned in the headlight buckets. View Related Article
|
|
|
|