JP Magazine Homepage JP Magazine
Facebook Jp Magazine iPhone App

Making An Offroad Carburetor Fuel Hose

Prev
Making An Offroad Carburetor Fuel Hose
Making An Off-Road Carburetor - Cheap Avenger
Finally, the fuel bowl vents can dump raw fuel into the carb at extreme angles even if the float level has been dropped. An old-school trick is to use a piece of fuel hose to connect the front and rear bowl vents. That way any fuel slosh transfers to the opposite bowl and not straight down the carb throat, glugging the engine. Don't forget to drill or punch some holes in the top of the hose so the bowls can still ventilate. View Related Article
Making An Offroad Carburetor Parts Making An Offroad Carburetor Spring Loaded Needle Making An Offroad Carburetor Bowl Gaskets Making An Offroad Carburetor Side Making An Offroad Carburetor Needle And Seat Assembly Making An Offroad Carburetor Float Making An Offroad Carburetor Seats Installed
Making An Offroad Carburetor Lowering Float Levels Making An Offroad Carburetor Fuel Hose
Jp
JP Magazine