JP Magazine Homepage JP Magazine
Facebook Jp Magazine iPhone App

Adding New Yj Suspension Parts Hangers

Prev  Next
Adding New Yj Suspension Parts Hangers
Rubicon Express 2.5" Jeep Wrangler YJ Lift - Off-Highway Why-J
The spring hangers tend to get bent inward when the factory guns down the spring main eye bolts. Use an adjustable wrench to gently open up the spring mount to allow the slightly fatter poly spacers in the new springs to slide in. Some slight persuasion with a dead-blow hammer is usual, but you shouldn't need to kill the spring eye with a hammer to get the new spring into position. View Related Article
Adding New Yj Suspension Parts Side View Adding New Yj Suspension Parts Parts Adding New Yj Suspension Parts Springs Adding New Yj Suspension Parts Jacked Adding New Yj Suspension Parts Hangers Adding New Yj Suspension Parts Shackle Bushing Adding New Yj Suspension Parts Bolt
Adding New Yj Suspension Parts Bolt Plates Adding New Yj Suspension Parts Shock Mount Adding New Yj Suspension Parts Leafs Adding New Yj Suspension Parts Under View Adding New Yj Suspension Parts Front View
Jp
JP Magazine